Re: can a dell poweredge 2600 run windows 7?
so what you're saying is the poweredge can accept windows 7 but some drivers aren't accreted by it? explain the 2008x86, is that the server 2008 or a different kind of driver for it.
View ArticleRe: can a dell poweredge 2600 run windows 7?
Server 2008 comes in 32-bit (called x86) and 64-bit (called x64). Server 2008R2 comes in ONLY 64-bit. Server 2008R2 is based on the same kernel as Windows 7, so it is better to use 2008R2 drivers in...
View ArticleClik here to view.
Re: How to update the bios on a Dell Poweredge R610
Hi ReyUpdate by SSU_DVD_7.1.0.0-107 (4.6GB) still error by mismatch BiosWrapper.efi and countdown to restart. After restart, i found error like this below. After that i upplug AC power supply 1...
View ArticleRe: Options to update a Poweredge R710 server with latest firmware when ESXi...
Can you please repost the ISO?Thanks!
View ArticleRe: M1000E how to get 2 network connections for one blade
A1, and A2 will be for the passthrough
View ArticleRe: PowerEdge C1100 dead in the water...
No secret handshake. These servers being sold on e-bay appear to be custom designed for some ISP or were part of a different release cycle than the one for which drivers are available on Dell's site....
View ArticleRe: M1000E how to get 2 network connections for one blade
Sorry but I still don't get it. I assume you mean fabric A1 slot and A2 slot. I ommitted the fact that theA2 slot is vacant. But what physical ports?? I could see if I had a pass through card in A2...
View ArticleRe: M1000E how to get 2 network connections for one blade
With only having the A1 passthrough module you will be limited to a single port per half height blade. What blades do you have installed?If you HAD A2, then it goes like this.A1 has ports 1-16, A2 has...
View ArticleRe: How to update the bios on a Dell Poweredge R610
The issue is that you have attached an HP monitor to the Dell server, and the server doesnt like that.just kidding :)Since you are using the SUU via the lifecycle controller, you have encountered a...
View ArticleRe: How to update the bios on a Dell Poweredge R610
"The issue is that you have attached an HP monitor to the Dell server, and the server doesnt like that."Haha, Rey. XDOK. This valued answer.i will do it on next MA time.ThanksFx Tracking
View ArticlePowerEdge con RAID1 no detecta nuevo HDD SATA 500GB (para Rebuild)
Disponemos de un DELL PowerEdge 840 con RAID1 (SAS 5/iR Adapter) de 2 HDD SATA 250GB.Uno de los discos se dañó y ha sido substituido por uno nuevo DELL Hitachi 500GB SATA.Si el nuevo disco se coloca en...
View ArticleRe: Options to update a Poweredge R710 server with latest firmware when ESXi...
This is a link on this page for downloading Repository Manager and the second video shows in detail how to create a bootable iso for your system as...
View ArticleRe: Options to update a Poweredge R710 server with latest firmware when ESXi...
Yeah that's what I did. It is really easy. Just select the Linux version and create the ISO. The plug ins to make the ISO take about an hour to download and install but after that you have all the...
View ArticleRe: PowerEdge con RAID1 no detecta nuevo HDD SATA 500GB (para Rebuild)
Oscar,Sólo para confirmar. Usted ha dicho que cuando se inserta la unidad de repuesto se muestra como Ready. A continuación, dijo que estaba mostrando como desaparecidas. ¿Se refiere usted a OpenManage...
View ArticleE122C lcd message on poweredge 2950
We have power edge 2950 which is used as server for wincc application. It was running OK. During plant shutdown i shutdown it normally. I switched off its power and use blower fan to remove dust. After...
View ArticleRe: E122C lcd message on poweredge 2950
You can only "remove" the error by addressing the error that is triggering it.As a CPU is indicated, does it say whether it is CPU 1 or CPU 2? Is "E122C CPU" the FULL message on the LCD?You might...
View ArticleRe: E122C lcd message on poweredge 2950
Yes. because after this message, amber light goes off and it looked like halted so only message i get is "E122C CPU". I will go on with ur suggested steps and hope that it would work.
View ArticleRe: PowerEdge C1100 dead in the water...
Well,( I got schooled lately on that subject )I got 12 CS24-TY, they where leases to <insert really big name here> and at the end of the leases they are replaced by newer hardwares and the old...
View ArticleRe: E122C lcd message on poweredge 2950
Also please clarify that in last step, should i remove the processor of CPU 1 and insert processor of CPU 2 to CPU 1 slot with cpu 2 slot empty?
View Article