Re: E122C lcd message on poweredge 2950
Basically, you are determining whether either of the processors or slots are bad, so you want to try each processor, one at at time, in slot 1.
View ArticleRe: E122C lcd message on poweredge 2950
thanks.... let's suppose that CPU 1 processor/slot is faulty. Then will it work if i put processor in CPU 2 slot and start it? I am just confused that for starting of system is it mandatory that CPU 1...
View ArticleRe: E122C lcd message on poweredge 2950
Not a dumb question. The server requires slot 1 to be occupied, so if slot 1 is bad, then you are looking at a motherboard replacement to get the system back up and running. If slot 2 is bad, then...
View Articlecan't get my keyboard/mouse (and my USBs) don't work on my PowerEdge SC430
Hi,I have a PowerEdge SC430. I am unable to use my keyboard and/or mouse on my system because they keyboard is connected via USB. I even installed a 5 port USB host card and the USBs are not...
View ArticleRe: can't get my keyboard/mouse (and my USBs) don't work on my PowerEdge SC430
Have you tried the front as well as the rears?Was the USB controller disabled in the BIOS previously?What was happening when this started?One thing you can try is to Power off the system and unplug the...
View ArticleR710 Memory Upgrade possibility with mixing 4GB and 16GB modules
Hello,We have a R710 server with 12 x 4GB memory modules.The actual configuration is: 48GB Memory (12x4GB), 1066MHz, Dual Ranked RDIMMs for 2 ProcessorsWe would like to upgrade the memory of the server...
View ArticleRe: can't get my keyboard/mouse (and my USBs) don't work on my PowerEdge SC430
Basically I took this project on as a consulting basis. I have no idea how the system got like this. All I know now is that every USB including the front and back ones do not work. Where exactly is...
View ArticleM610 iDRAC Firmware Upgrade Fails
I have an M610 Blade with iDRAC6 firmware are v2.10. I was able to upgrade to v2.20, but any further upgrades fail. Tried 2.20 to 2.31 and receive message that 2.31 is lower or equal to 2.20 so it will...
View ArticleRe: can't get my keyboard/mouse (and my USBs) don't work on my PowerEdge SC430
I found the RTCRST jumper.....let me go change it up like you suggested...what do you actually mean by "Apply power for a few 10 seconds, then power off again. "how do you power it on for only 10...
View ArticleRe: R710 Memory Upgrade possibility with mixing 4GB and 16GB modules
Arnaud,To max out the server with the dimms you specified you would need to install the 16gb dimms on A1, A2, and A3 as well as B1, B2, and B3. All the remaining dimms would be 4gb dimms. That will...
View ArticleRe: can't get my keyboard/mouse (and my USBs) don't work on my PowerEdge SC430
Just power it on till you see an indication of power. A light or something.Then power back down and restore the jumper.
View ArticleClik here to view.
Server Temps C1100
Are these temperatures normal? Room is a bit warm, 23 degrees celsius. Should i be concerned with the operating temperatures? The server is currently hosting only 5 vm's. It is for a lab environment,...
View ArticleRe: PowerEdge 2650: "System Halted!"
I had this exact System Halted problem on my 2650 dual cpu, I couldn't even get it to boot at all. I finally noticed one of the cpu fan clips was not clipped correctly and the cpu fan was not touching...
View ArticleRe: PowerEdge con RAID1 no detecta nuevo HDD SATA 500GB (para Rebuild)
La unidad solamente aparece cuando se inserta en caliente. Solamente en ese momento es detectado por el OS Windows 2003 Server y tambien aparece en el Open Manage Administrator.Si luego se reincia el...
View ArticleRe: 6800 CPU upgrade
Got any further with this? As I'm just starting down the same road myself!ThanksDanny
View ArticleRe: 6800 CPU upgrade
I haven't gone any further yet. I've had other priorities thus far.
View ArticleClik here to view.
Re: M610 iDRAC Firmware Upgrade Fails
Gitpicker33,A couple things.What revision is the enclosures CMC at? It may be out of date and causing issues with the updating of the idrac.Have you tried going to the update tab in the dracs web...
View ArticleRe: PowerEdge con RAID1 no detecta nuevo HDD SATA 500GB (para Rebuild)
La unidad física no deben aparecer en el sistema operativo a menos que sea un miembro de un disco virtual, si se enrutan a través del controlador. El disco que sólo deben aparecer en el sistema...
View ArticleRe: Server Temps C1100
Mike,Those temps are fine, you are not even near the warning points for the temperatures. The closest one you have is CPU0 and it is still a ways away.
View ArticleRe: M605 Windows 2012 crashing regularly
well, this happens with a M620 too.. so because they have the same shared disk, i'm suspecting a problem with the filesystem.
View Article