Re: PER510 BIOS/FW UPDATE FAILS
Yes, that is what I tried to do in the first place, create a PER510 specific SUU DVD from the OME Repository Manager, with the above described results. Since I was told to stop wasting time on this...
View ArticleRe: PER510 BIOS/FW UPDATE FAILS
That is very strange... I used our DELL RM to create a SUU CD for the PER510 with just the Windows OS(es) and it was only 1.7 GB ?This was based from the DELL Bundle v462... and DRM v1.6.0.244.
View ArticleRe: PowerEdge Rack Cable Clips
It would be nice to be able to get additional clips to run up the opposite side of rack. Does anyone know where I can purchase more clips (and mounting hardware)?
View ArticlePoweredge T110 II - needs some questions answered
I am looking to get this server with Windows Server 2012 (Foundation or Standard edition), cabled for 4 drives, no RAID controllers.1) Someone posted a week ago on this forum that this model is almost...
View ArticleRe: Poweredge T110 II - needs some questions answered
1. It is old and is due to be replaced, although any time table would not be public, nor is it usually released even to support staff much in advance.2. Two common issues with a T110 II ... 1)...
View ArticleReuse Ironport C100 hardware?
i have an old Ironport C100 that Cisco EOL'ed as soon as they bought Ironport. is there any way to rewrite the BIOS or O/S, so the hardware can be reused? it currently hangs at bios loading A02 right...
View ArticleRe: Reuse Ironport C100 hardware?
Somewhere in the forums is a post or two about flashing OEM-altered Dell servers using a special switch ... McAfee was one, and I think I remember there being talk of an Ironport machine too.
View ArticleRe: Poweredge T110 II - needs some questions answered
8) Well sort of answering my own question:Officially largest drive supported is 2TB: en.community.dell.com/.../20364591.aspxUnofficially someone had gotten 3TB drive to work by installing Intel...
View ArticleRe: Poweredge T110 II - needs some questions answered
On older chipsets, an updated Intel driver is usually needed, so that would make sense."Will this configuration work: 2 TB boot drive + 2x2TB drives in software RAID1 + one more 2TB drive for...
View ArticleClik here to view.
Re: remindpopup2 error with poweredge 1800
I triedto upgradewindows server2003 x64(sp2)towindows server 2008r2andI got thismessage.I'msorry to askso muchhelp, butwhat do Ineed to...
View ArticleRe: remindpopup2 error with poweredge 1800
The PERC 4/DC is not supported in 2008R2 ... no suitable driver exists, either from Dell or LSI. You will need to upgrade to a PERC 4e/DC or some other controller to go to 2008R2. I think I've read...
View ArticleWhat kind of graphics card can I put in Poweredge T110 II?
Server has following slots:4 PCIe G2 slots:Two x8 slots (one with x16 connectors)One x4 slot (with x8 connector)One x1 slotGraphics card needs to support Windows server 2012 (are Windows 8 drivers...
View ArticleRe: PER510 BIOS/FW UPDATE FAILS
there is an issue where out of band updates can fail if the idrac fw is prior to v1.85 and the LifeCycle controller fw is prior to 1.5.2, but this should only affect idrac and LC update methods, not...
View ArticleRe: What kind of graphics card can I put in Poweredge T110 II?
Its a trial by error when adding video cards to this server. You will most likely need one that will fit the x16 slot, less than 25w. Disable the onboard video in the F2 bios and the card should work...
View ArticleRe: What kind of graphics card can I put in Poweredge T110 II?
So what options from NewEgg's list are compatible? Anything with x16 at the end?How is x8 with x16 connector (which is what T110 II has) different from regular x16 slot?
View ArticleRe: What kind of graphics card can I put in Poweredge T110 II?
I would try any of the cards with x8 at the end, even though it says one slot has x16 capability, but only has x8 power. The card can only be up to 25w. Regards,
View ArticleRe: Dell PE M1000e Blade Enclosure
Nishantha Guruge when i plug the network cable , all cooling cooling fans starting to run with a big noizeThat is normal. When the CMC is removed or fails over all fans will run at maximum RPM until...
View ArticleRe: What kind of graphics card can I put in Poweredge T110 II?
Is 25w limitation due to power supply? What if I upgrade power supply?
View ArticleRe: What kind of graphics card can I put in Poweredge T110 II?
No, limitation is due to maximum power provided through PCIe slot. Upgrading the power supply will only help if you get one with a power cable dedicated to power the graphics card.
View ArticleiDRAC6 FW revisions...
Hi again,Monday I asked about iDRAC7 versions. Today, its iDRAC 6. We have customers with iDRAC versions 3.0 and 3.42. The only versions on the web site are 3.50, 3.35, and 3.33.When we see this...
View Article