Re: Cache Battery 0 in controller 0 is Degraded (Non-Critical) [probably...
Ganeshsha20,This may be a false error. What is the driver and firmware showing for the H700? Also, what is the state of the remaining system, anything else out of date as well?Lastly, what is the OS...
View ArticlePCI R520 PCI RISER?
Hi,Anyone knows if it is possible mount any PCI riser to PE R520?It seems that only acceptes PCIe riser, but there is any video in youtube that shows a R520 with a PCI riser.I have a PCI card that i...
View ArticleDisable SSC on R815
Is it possible to disable spread spectrum clocking on PowerEdge R815?
View ArticleRe: PCI R520 PCI RISER?
JoRdluS,The R520 only supports PCIe risers at this time. I am not sure why you say a PCI card installed on youtube. What is the link you are referring to?
View ArticleRe: Poweredge T Servers and Startech PCI-E USB 3.0 Cards
Steve,Currently there are no Dell servers certified to run USB 3.0 cards. That IS NOT saying that they are not going to work, they just are not tested on the servers. So we wouldn't be able to give a...
View ArticleRe: Disable SSC on R815
Otemizsoylu,It is not currently possible to disable the SSC on an R815.
View ArticleRe: Disable SSC on R815
Is there a plan to add this support. We are planning to connect c410x boxes to R815. These boxes are currently connected to R710 servers. C6145 servers which have quite a similar architecture do work...
View ArticleRe: best way to update firmware. New to dell
I have windows server 2008 R2. I tried configuring the DRAC. does it need to be static IP? It's set as dedicated which I'm not to sure what the at is versus shared and shared with failover. The machine...
View ArticlePowerEdge 2900 - Windows Server 2003 R2
Hi, I have a PowerEdge 2900 - with 2 x 250gb HD's. We have a Dell SAS 6/iR integrated controller - configured to RAID 1. Just before Christmas, one of our 250gb HD's failed - drive 0. We only received...
View ArticleRe: PowerEdge 2900 - Windows Server 2003 R2
Irish_Rover2013,What is the driver and firmware version on the controller? Also, what is the OS installed on the server?
View ArticleRe: best way to update firmware. New to dell
Don't get it..I made the adjustments from the front LED and made a static ip and can't ping server..
View ArticleRe: Which Motherboard do I have? Poweredge 2800 server.
No, all 2800's would be a tower chassis; the 2850 is the rackmount version of the 2800 ... both were released at the same time (nearly all tower systems have a rackmount counterpart - 2900/2950,...
View ArticleRe: best way to update firmware. New to dell
I do see active LOM and it says No active LOM
View ArticleRe: best way to update firmware. New to dell
Ha..I got it..I just reset to default and entered in ip again.. IPMI was on and reset set it to off, not sure if that did anything.
View ArticleRe: best way to update firmware. New to dell
spoke too soon. login fails..domain says thisdrac? do I have to enter in my domain and use a domain user?
View ArticleRe: PE1850 - Which riser card do I need?
monkeyNeilMACHINE 1Backplane: CN-0F1318-13740-52N-00ZI Rev A01Mobo: CN-0D8266-13740-52S-005B Rev A02MACHINE 2Backplane: CN-0F1318-13740-4BI-005U Rev A01Mobo: CN-0D8266-13740-4BI-00T7 Rev A02Both...
View ArticleRe: PowerEdge 2900 - Windows Server 2003 R2
Did y'all clear the ESM log after replacing the hard drive?
View ArticleRe: SAS 6/IR integrated
I have r610, isn't there ahything cheaper than the h710 or h710i? I need raid 5
View ArticleRe: SAS 6/IR integrated
If you must have RAID 5, then the H7x0 (6Gbps, 512/1024MB cache) or the PERC 6/i (3Gbps, 256MB cache) are your only options. The PERC 6 is much cheaper than the H7x0. Other controllers do RAID 10 but...
View Article