I have provided a client with a proposal that includes 80 PowerEdge R430 Production Servers with 64GB RDIMM and 400 X2 GB SSD + PowerEdge Management Servers with 32GB RDIMM and 300 X 2 GB SSA, housed in 3 Dell Netshelter cabinets.
These are used for IPTV with 24/7/365 continuous service. How do I compute the total power requirement for the above system?
Thanks!
HI
The Server is about 1 month OLD and now its crashed 2 times with msg
Event Message: A fatal error was detected on a component at bus 23 device 0 function 0.
&
Event Message: A fatal error was detected on a component at bus 23 device 0 function 1.
Hello,
I have a PE2950 which boots with the following:
Testing memory. Please wait.
Keyboard failure
I'm not able to use the keyboard and change the BIOS setting at all or configure raid volumes without keyboard. What does this mean? USB hub is broken on the board or I have to reset the MB or something??? BIOS is 2.7.0, I just upgraded via PXE boot with automatic flash script.
It is not the keyboard that works well with the other PE2950s.
Any help appreciated!
Thanks
Levente
Hi
We got an new R330 server with an PERC H730 controller and it seems it blocks my (Hitachi & Seagate) 600 GB SAS Hard disks. Status: "BLOCKED"
The system and the PERC controller is updated to the latest firmware.
I understood that there was in the past years some issue with "blocked" non-dell certified HDD's but DELL decided to unlock them again with an updated firmware.
The controller reads out and display the basic information of the HDD's so there is communication.
Is the "blocking" again in place in 2017 or is there some other problem with my disks?
How to solve this?
thanks & best regards
Michel
Buenas tardes.
Estoy tratando de instalar un nuevo sistema operativo en mi servidor power edge R210. Cuando selecciono que inicie desde el cd, para poder ejecutar el openManage Systems Management Tools and Documentation, el servidor informa que no hay un dispositivo booteable.
He intentado con la versión 5.4, 6.2 y 7.1 del openManage Systems Management Tools. Tambien probé con el cd del sistema operativo (windows server 2008) y tampoco funcionó. Asimismo, probé con otros live cd y estos si funcionan correctamente.
Verifiqué que la lectora de cd/dvd este correctamente instalada en la motherboard.
Que sugieren que pueda hacer ?
Muchas gracias.
Saludos.
Folks,
Recently purchased 2 R710's from eBay and thought all was going well until I powered up the 2nd server. The first thing I noticed right away was the Dell logo and status bar upon BIOS boot were missing. It does however recognize it's an R710 and using 6.4.0. I've tried reflashing the BIOS with 6.4 and even older versions but no fix yet. I came across something about OEM BIOS but could'nt really piece together a plan to get it back to a Dell factory flash.
Any ideas?
i bought an R710 system-board model 0YDJK3 to replace my old board with same model number.
when installing new board the bottom tray dose not align properly with the guides so it will not fit properly into chassis.
i would like to see if it is possible to remove both system boards from their treys so i can use the one that fits nicely in chassis
I cannot power on the c6320 with 2696v4
But I can power on it with 2683v3.
Hello Dell community,
I need a part replacement for a PowerEdge R720.
I do not know the name of this part, but it goes at the front of the server (right side). See image attached.
Do you guys know the name? Where can I buy the replacement? Also, what is the socket of the screwdriver, I need to remove it?
Hi
I am planning to add new CPU to Dell PowerEdge R430 Server. Currently server working as single socket server and with the upgrade need to be dual socket server.
1.) I am going to order CPU with exact similar server model with currently existing module. Are there anything should I order apart from that?
2. ) Is it only to follow the steps given in owner's manual? Do I need to do any BIOS upgrade ?
3.) Will these processor modules HT enabled by default?
Thanks
GPMPA
We have Secure Boot enabled in our environment as a standard, but we also have some PowerEdge M630s with Intel X520 Mezz cards installed whose firmware is old enough not to have a signed boot ROM, which means that every single time those servers reboot, they halt on a Secure Boot warning about the NIC's untrusted firmware. The fix is of course to update the firmware, but even the latest updates available on support.dell.com for the X520 and X710, both released in the last 1-2 weeks, do not run on Windows Server 2016 -- even though they're listed in the Drivers and Downloads page after I select Server 2016 as my OS. The updates instead immediately fail with an "Inventory Collection Failed" error, and when I extract the update contained in the Dell package to run the underlying file directly and dig through the logs it generates, the root error mentions an unrecognized OS. In our particular environment it isn't feasible to temporarily move these NICs into servers running an older OS in order to complete the update, nor will these firmware updates run from WinPE or even directly on the Lifecycle Controller. Disabling Secure Boot also isn't a viable option, especially with no ETA on when the underlying problem will be resolved.
I'm not sure if this is a Dell issue or an Intel issue, but Windows Server 2016 has been out for a year now, and in fact Microsoft just announced the NEXT release called Windows Server 2016 Version 1709, which will be coming out this month or next, so there is absolutely no excuse for major OEMs like Dell and/or Intel to not fully support 2016 by now.
my server was running find it a dell poweredge 2950 i have two raid that running thats all but the main raid with the server 2008 install with all the data everything , now it wont boot to the window need help i dont know what to do at list if i could access it and retrieved my data that would be good but the other raid controller drive said ready the main one with the os said sas failed
Hi
I tried to update my PE M620 blade using official DELL iso image from dell.app.box.com/.../32719678641. After update I reboot blade according guide from iso. Blade hasn't powered up normally after reboot (stuck in bootloop). On CMC I saw messages about bus error. After virtual and physical reseat of server, it powered up normally, but i don't see QLogic BCM57810 devices in BIOS configure menu and ethernet devices in DELL LiveCD. I think that firmware of Ethernet adapters was broken during update. How i can repair firmware of these adapters? lspci tool is showing me NICs when I load Dell Live CD image, but bnx2x kernel module can't be loaded, because firmware is broken.
Service Tag : 1MRCR22
Wed Sep 06 2017 07:43:34 A bus fatal error was detected on a component at bus 0 device 1 function 0.
Wed Sep 06 2017 07:43:34 A bus fatal error was detected on a component at bus 1 device 0 function 0.
HI
I have now to R620 that failes the update to the Network Card. Please see the attachment.
Intel(R) Ethernet 10G 2P X540-t Adapter
| Firmware | 16.5.0 | Upgrade | 18.0.16 | Network_Firmware_WNHMJ_WN64_18.0.16_A00.EXE |
Intel(R) Ethernet 10G 4P X540/I350 rNDC
| Firmware | 13.5.2 | Upgrade | 18.0.16 | Network_Firmware_WNHMJ_WN64_18.0.16_A00.EXE |
Intel(R) Gigabit 4P X540/I350 rNDC
| Firmware | 13.5.2 | Upgrade | 18.0.16 | Network_Firmware_WNHMJ_WN64_18.0.16_A00.EXE |
I have tryed via iDrac server, Lifecycle controller and it just failes with the remark "Update failed" PR19 or PR21, and ind the Lifecycle controller SUP517.
Anyone got any thing i can try ... ?
Regarts
/Jesper
The RAID 5 lose two of the 3 hard drive and we are in the process of replace them, but we need the CD/DVD with the Windows Server 2008 to install and possible the other missing CD/DVD's.
Where I could obtain the CD/DVD to install the Windows Server 2008 R2 SP1, Standard Edition, Media Kit for the T420?
Part number is 10C4W
I purchased a used R910 (no warranty) with the intent of building a VMWare host to work on some credential programs.
It has the X16 backplane. I got it with one CPU, no HDD, and 32GB RAM. It would go through the POST process, and I was able to enter the H700 RAID BIOS without issue, but at the end of POST any other course of action (like System Setup (F2) or System Services (F10)) would fail immediately after POST with a CPU error.
I purchased 2 SLC3Q E7-4830 CPU's & U884K Heatsinks, and installed them with some Arctic thermal compound.
Now when it boots, it POSTs without errors... however. The fans start out on the lowest speed, and immediately following the Dell Logo screen at the beginning of the POST gradually increase one step at a time until they are at max RPM (6,000+). I can get into BIOS setup and configure things without issue. I can get into System Services, but everything is very very laggy, and attempts at firmware updates fail.
I am quite familiar with some of the smaller Dell servers (1850's through R430s), but this beast is a new animal to me.
Hope it is not a bad motherboard, but can anyone recommend some steps to determine the issue?
Please let me know if more information would help!
Thanks!
I have an R620 with 2x E5-2670 and the temps are 70c and 60c at idle with CPU utilization at 1%. Running Windows Server 2016 Essentials. Everything looks good in the enterprise iDrac7. No warnings or messages. All the fans work and are pushing 4000+/- rpms each. The heat syncs are correct with new thermal paste. I just bought the two CPUs from esiso. I find it hard to beleive that they would sell me damanged CPUs. Any ideas guys?
does anyone have a list of 1U PowerEdge servers that have dual power supplies?
Hello Community,
I would like to extend dell power-edge 430 Server's video through HDMI or DVI port on PCIe Card.
Can any one suggest me the appropriate card ?