Re: RAC0503 and RAC0501 with T620 and H310
I'm not sure if the issue is with the controller or the DRAC. I would lean more toward the DRAC. Try resetting the DRAC to defaults. If that does not resolve the issue then I would look at replacing...
View ArticlePoweredge SC1425 Boot from USB?
Hi guys,I have a Poweredge SC1425 with a version of Office 2003 on it which is locked out due to activation. The server doesn't have a dvd/cd drive so I'm booting by USB, the only problem is under boot...
View ArticleRe: R720 Upgrade idrac7 express to enterprise
Chris the side times out. Is there a number i can call?Thank you
View ArticleRe: Poweredge SC1425 Boot from USB?
It appears to be the same generation as their main line of 8G servers, which were the first to support USB device booting.So, assuming it is capable and like the other 8G systems, you will need to...
View ArticleRe: Dell R710 memory upgrade best slots
Thank you. Updated the Bios successfully. So this is the best memory configuration for 6 x 16GB sticks? :)
View ArticleRe: R720 Upgrade idrac7 express to enterprise
Here is full link. Click on Servers on the left - chat1.us.dell.com/.../cimlogin.aspx
View ArticleRe: Dell R710 memory upgrade best slots
Also, I just looked in our system and it's currently in Advanced ECC mode. Do i change this to Optimizer Mode or change the way i want to put in the new dimms?
View ArticleRe: Dell R710 memory upgrade best slots
You should change it over to Optimizer Mode for that configuration. To use advanced EC you would need more or less dimms, as 6 won't work for the configuration.
View ArticleRe: poweredge 850 front panel amber light
Sticky1,The manual has been restored - ftp.dell.com/.../poweredge-850_User%27s%20Guide_en-us.pdfSorry for the delay.
View ArticleRe: T710 Video
These servers were not designed with workstation capabilities in mind. As such, they were not designed for graphics cards and indeed Dell does not support graphics cards in these machines. The...
View ArticleRe: poweredge 850 front panel amber light
The forums don't like FTP links, so here is the HTTP link:ftp.dell.com/.../poweredge-850_User&
View ArticleDell T710 restart problem, freezes with fans at full speed
Hello.I´m having problems with my T710 server. Every time that i try to restart the server it shutdown correctly but when it restarts it freezes in a state that puts the fans at full speed and the...
View ArticleRe: Dell T710 restart problem, freezes with fans at full speed
What is the BIOS level on the server at this time? An update may cure the fan and restart problem if its not up to date.Regards,
View ArticleNo iDRAC console video when using a second graphics card on PE R720
Is there a way to redirect iDRAC video to a second graphics card?Have a PE R720 that has a high end NVidia card installed for graphics processing.With the card installed I get no iDRAC video console....
View ArticleRe: No iDRAC console video when using a second graphics card on PE R720
Hello sequeiracaThe iDRAC uses the embedded video controller for video processing. If the embedded controller is disabled then the console will not function. If the BIOS is automatically disabling the...
View ArticleM605 Windows 2012 crashing regularly
I have two M605 servers (tag GQ3GQH1 is one of them) - configured the same way. (exact specs below). They used to have Win 2k8R2 installed and they worked fine.Last week i did a fresh install of...
View ArticleLoading a new O/S on to an M620
Hi ,We are trying to figure out some unexpected behaviour.On an M620 blade, we loaded RedHat. The default System Bios settings were used....Internal SD Card ON, 1st boot device SD card.After loading...
View ArticleT320 PSU upgrade after the fact?
I purchased a T320 through my rep for home/dev use and when building it the 350W cabled PSU was more than adequate for my needs but when I try to run all 8 hot swap drive bays I get power failures...
View Article