Re: r210 II stuck at bios logo
What OS are you running on this server? I will provide a link to updating the bios. Regards,
View ArticleRe: replaced brand new PERC 5i battery, but still showing up as failed
I would update the firmware on the controller, the driver should be updated as well, but doesn't affect the battery. The battery can take from 24-48 hours to fully charge. If it is not charging after...
View ArticleRe: replaced brand new PERC 5i battery, but still showing up as failed
i chose the start learning cycle task on the battery page, i never had to do that, can you explain what does it do if i chose that option?
View ArticleRe: replaced brand new PERC 5i battery, but still showing up as failed
You chose the learning cycle instead? Why? Just curious. The learning cycle completely drains the battery of charge, then fully charges it - it does this to "learn" the current capacity of the...
View ArticleRe: poweredge 850 front panel amber light
As Chris said, he has addressed the missing manual for the 850 to the Support Site team
View ArticleRe: replaced brand new PERC 5i battery, but still showing up as failed
^^^ i wish you posted this earlier... initially after i replaced the battery, the status was failed, not charging at all, so you were saying if i leave it like that for 24 hours or so, it may start...
View ArticleRe: replaced brand new PERC 5i battery, but still showing up as failed
It can depend on the current charge of the battery. It may be charging but may not update the status for hours - until it has some progress to change the old status. It won't "start" charging after...
View ArticleRe: Perc H700 in Dell R710 Backplane Cable Question
Chris,I purchased the P110M cable and it is 2 inches to short and won't reach the 4 drive 3.5" back plane when plugged into the controller. Is there another part number for a longer cable?
View ArticleRe: Perc H700 in Dell R710 Backplane Cable Question
Mooks,I apologize for that. The side you are connecting is going to call for this cable then - N170MP110M is 621MM (25.7in) long N170M is 731MM (28.7in) long
View ArticleRe: RAC0503 and RAC0501 with T620 and H310
psuMickeyno way to disable the S110 stilWhen you changed the SATA mode from RAID to AHCI you disabled the S110, so it is disabled.Select the option to Collect System Inventory On Reboot(CSIOR). This...
View ArticleRe: replaced brand new PERC 5i battery, but still showing up as failed
this server is due for another reboot later today for the Windows patch, would the battery state change from learning to charging or failed state?
View ArticleRe: replaced brand new PERC 5i battery, but still showing up as failed
Its possible. I would update the firmware prior to the windows update, and then you only have 1 restart. It may be a mismatch in bios\controller firmware and windows updates.
View ArticleRe: Setting 'Optimized' memory mode via Open Manage CLI on Dell R410
Hi Chris,We originally had 4 x 4GB (dual rank I think) and we replaced these 4 on half of these servers with 4 new 8GB modules (so 32GB per box), and took the 4 x 4GB modules and put them in the other...
View ArticleRe: R410 BIOS Update fails with "doDepcheck Failed" error
I have the same problem on some R710s. I've installed Open Manage 7.2.0. R710_BIOS_VCNMH_WN32_6.3.0.exe still fails with the doDEPcheck failed .
View ArticleRe: Dell C1100 / CS24-TY bios and ems/ibmc update
I wanted to chime in and cross link a few threads with some info I thought might help people. This thread seems "related" in a "set of four". I am going to post this same post on all four in an effort...
View ArticleRe: Dell CS24-SC Drivers
I wanted to chime in and cross link a few threads with some info I thought might help people. This thread seems "related" in a "set of four". I am going to post this same post on all four in an effort...
View ArticleRe: C1100 cloud server no POST after bios update
I wanted to chime in and cross link a few threads with some info I thought might help people. This thread seems "related" in a "set of four". I am going to post this same post on all four in an effort...
View Article