Re: UEFI says no bootable device
I deleted the raid one because 2012 said it couldn't install OS because it contained MBR. IR recreated it and install seemed to take off, during the install procedure it reboots and again it says no...
View ArticleRe: UEFI says no bootable device
What server are you using? In the F2 bios, what does it show for boot devices? Thanks,
View ArticleRe: UEFI says no bootable device
I tried following this..let's see what happens. I'm using r610 http://www.sevenforums.com/tutorials/186875-uefi-unified-extensible-firmware-interface-install-windows-7-a.html
View ArticleRe: UEFI says no bootable device
Power up the server, boot to the Ctrl R bios. Delete the array, then configure a disimilar array, such as a RAID 0. Initialize it. this will remove all traces of the first array and MBR; Then...
View ArticleRe: UEFI says no bootable device
Will the above procedure also work? the link I posted? it seems to be working.
View ArticleRe: UEFI says no bootable device
If it works this time, you should be good to go. The method I provided is a fall back if you keep having errors.
View ArticleRe: PER 815 cannot shutdown properly
Cecep1974,Please take the server to a Minimum to Post Configuration. That involoves downing the server and removing everything but the following -System board I/O board Risers Processor (CPU1) with...
View ArticleRe: Options to update a Poweredge R710 server with latest firmware when ESXi...
Login is still "r710bios", new password is "0quuycuw". Let us know how it goes. Thanks!
View ArticleHost System is performing a LPC reset
Hello, I have almost new Dell PowerEdge R320. From time to time we get restart:2013-03-24T10:08:21Z NIC101 The NIC Slot 1 Port 2 network link is up.2013-03-24T10:08:20Z NIC101 The NIC...
View ArticleRe: RAC0503 and RAC0501 with T620 and H310
I installed the new iDrac firmware - 1.37.35 and rebooted then checked the BIOS and saw the same - no way to disable the S110 still. The iDrac still shows errors RAC0503 and RAC0501.
View ArticleRe: Host System is performing a LPC reset
Do you have any of the symptoms at the top of this post?en.community.dell.com/.../19491704.aspx
View ArticleRe: Host System is performing a LPC reset
No, i didn't see problem with iDRAC, but i didn't try to connect to iDRAC. This reboot we get about one per month :(
View ArticleRe: Perc H200 Embedded Windows ^$ Bit driver
Hi Daniel,I was getting confused.I was looking for an exe to double-click and run a Dell wizard. Then I realised from your last post that the ftp folders had an inf file that I needed to use via Device...
View ArticleRe: Options to update a Poweredge R710 server with latest firmware when ESXi...
Worked like a dream! Thanks so much!
View ArticleMS Hyper-V Server 2012 support on any Dell servers?
Any Dell servers explicitly supporting Microsoft Hyper-V Server 2012? (Not a server role but the bare metal hypervisor.) By supporting, I don't necessarily mean "pre-installed" but, say, a driver set...
View ArticleRe: MS Hyper-V Server 2012 support on any Dell servers?
There are none that "explicitly" support 2012 Hyper-V (standalone), but at the same time, there is no reason that servers 9G and newer (12G is the latest) would not ... it would just use the Server...
View ArticleRe: MS Hyper-V Server 2012 support on any Dell servers?
Thanks - I just need to confirm that it's the case, that:MS Server 2012 drivers would work / install on Hyper-V 2012 without much painIt can be managed the same way an MS WS 2012 would be. E.g. I...
View ArticleRe: MS Hyper-V Server 2012 support on any Dell servers?
I understand your need to confirm, but you'll need someone who has actually run it to confirm it for you ... I doubt the Dell guys will have any docs or other concrete info who have not actually tried...
View Article