Re: PE R810 Memory Configuration
the heat sinks would be shiny silver and the memory bridges are black.
View ArticleRe: T610 - PS 2 predicted failure and the use of a UPS
1. Does the T610 870W power supplies need a pure sine wave UPS or is a modified square wave UPS OK?>>.They are autosensing power supplies, so there is no preference.2. Is it OK to connect PS1 to...
View ArticleRe: PE R810 Memory Configuration
You would lose a small amount due to sparring, but in the current layout with the number of dimms you have. It is the only optimal configuration. You would need to add 8 8gb dimms or lose 8 to go with...
View ArticleDell UPS 2700W, MUMC and vSphere 5.0 configuration
HelloI have a Dell UPS 2700W with network management card and two R720s running ESXi 5.0. The two hosts are part of a HA cluster and I would like to be able to shut them down gracefully using MUMC in...
View ArticlepfSense on R420
I just bought a Dell R420 to run pfSense as a firewall. pfSense doesn't recognise the RAID or the Broadcom Ethernet ports. Has anyone experience implementing pfSense on R420?
View ArticleT110 power on no video no response
When I startup my T110, there is no video to the monitor and I am unable to connect to the server via RDP. Everything appears normal on the front panel (status light solid blue) and I have tried...
View ArticleRe: T110 power on no video no response
Hello TomHave you used this monitor/cable on the server before and received video output? Did you program a network address for the BMC? If so then try connecting to the embedded web server of the BMC...
View ArticleRe: T110 power on no video no response
Thanks Daniel.Yes, and I tried different monitors and different cables.No network address for the BMC.No, nothing was changed.
View ArticleRe: Dell R610 "Unsupported memory configuration" bios message
I get the post error. I have 4 X 2 gig sticks for 8 gigs of RAM. I populated A1, A4, B4, B1 as I thought the chart said but I get the F! thing. The Dell charts don't really make much sense. I wish...
View ArticleRe: T110 power on no video no response
Depending on which option you have, check the LCD/LEDs. Let me know if there are any messages on the LCD or what lights are lit on the LED.
View ArticleRe: Dell R610 "Unsupported memory configuration" bios message
Probably should be A1,A2 and B1, B2. (just guessing) Do all sticks the same technical specs?
View ArticleClik here to view.
Re: T110 power on no video no response
you could try clearing the nvram, but if the system is not beeping to indicate an issue, you could have a processor issue or just lost the video port.
View ArticleDell PowerEdge 1955 and 8GB Dimms of RAM...
Has anyone test an 8GB dimm of DDR2 ram in a Dell PowerEdge 1955? I get that it isn't officially supported. However much of the documentation appears to have been generated at the 1955's initial...
View ArticleRe: T420 Graphics support?
Hello. I just got a t420 server for my personal high performance computing and my cheaper PCIe graphics card won't work. Did you get your server to work with a card other than Q4000/6000? I am a bit...
View ArticleRe: DELL R900 Err Code : E171F PCIE Fatal Err B22 D0 F0 E1422 CPU Machine chk...
On server nothing is attached to other I/O boards, only I/O riser board is attached.We were using I/O riser's 4 ethernet connections for network.I write Centos iso file to DVD, you give. Then...
View ArticleRe: Dell PowerEdge 1955 and 8GB Dimms of RAM...
Got your message NPA. I haven't tried 8GB DIMMs in any of my 1955's... mainly because my blade chassis is a home use unit and I couldn't see needing 64GB on my Hosts, plus the 8GB DIMMs are insanely...
View ArticleRe: Dell UPS 2700W, MUMC and vSphere 5.0 configuration
Hi AndyThanks for the information, its very helpful! I would just like to shutdown all VMs on their respective hosts without doing a phased migration/consolidation onto one host. So in my instance I...
View ArticleRe: T420 Graphics support?
you can always clear the nvram using a motherboard jumper, so you are safe. I would also think the system would show video on the onboard if no video card is detected, but I dont have the means to...
View ArticleRe: Can it be battery fault?
A failing battery can cause issues as you are seeing, and corrupt the OS to keep it from starting. Here is a link to order a replacement battery:...
View Article