Re: Dell R415 "CPU 2 machine check detected."
Ended up swapping out CPU2 and it fixed the problem... Guess it was just a bad CPU!
View ArticleRe: R515 memory upgrade
After further research, with the release of the 32GB RDIMM's support was increased from 128GB to 256GB on this server as well, which requires the latest bios update. I also confirmed that the server...
View ArticleRe: Hyper-V & Precision 490
Yep .. first thing I though of ... and I can get to the screen during the install that lets me load the drivers and there are a bunch listed , but no matter which one i pick nothing ever picks up the...
View ArticleRe: Dell FS12-NV7 information?
That's odd, but sounds like it should be easy to fix. Pop open the case and clean it out - paying particular attention to the heatsinks on the CPUs. They're likely dusty/dirty, keeping their efficiency...
View ArticleClik here to view.
Dell PowerEdge 860
Good Afternoon, Everyone. I just now joined in with the Dell Community. I wanted to introduce myself, and say Hello. I have (2) Dell 3100's and a Dell E510.I have always enjoyed "Older" Dell systems. I...
View ArticleRe: Dell PowerEdge 860
Hello HerschelUnfortunately we have not validated any audio or video cards to work in the 860 so I am unable to provide suggestions. Regarding the memory, you can install 4x2GB DIMMs for a total of...
View ArticleRe: Dell R415 "CPU 2 machine check detected."
How long were the intervals between reboots on your server?
View ArticleRe: Dell R415 "CPU 2 machine check detected."
It'd go a few days between reboots sometimes, and sometimes I'd get 3 in a day.
View ArticleRe: Hyper-V & Precision 490
Ok ...Try the latest driver from Intel (since Dell does not support Windows 7 or 8 (and no Server OS's), the Vista driver is the latest Dell offers, and may not be sufficient):Intel Rapid Storage...
View ArticleRe: Dell FS12-NV7 information?
Hello Selta,I've done this :-xEverything is beautifully clean, and I replaced the thermal paste with IC7 Diamond.Doing that made the time to shut-down longer, but the machines both still shut down at...
View ArticleRe: UPS MANAGEMENT CARD
Access the management card by going to : https://card ip address, then go down to application notifications. You should be able make the necessary changes here.Link:...
View ArticleRe: UPS MANAGEMENT CARD
Thank you, I know the web interface, I want to change the sender address when sending warning with mail & smtp.No field in https://IP/set_net.htm ?
View ArticleRe: UPS MANAGEMENT CARD
With OpenManage Essentials installed, you can make the necessary changes. Here is a guide: downloads.dell.com/.../dell-opnmang-essentials-v1.0_User%27s%20Guide_en-us.pdf page 100 of 196 will walk you...
View ArticleRe: UPS MANAGEMENT CARD
I have already Multi-UPS Management Console, I wanted UPS independently of anyhardwarecan send metheir own alertsin caseof failure ofcomputers / servers.
View ArticleRe: PowerEdge 2900 - Windows Server 2003 R2
Hi, Sorry this is still not fixed. We had to swap out the new HD and received another new this afternoon. I tried to rebuild the Raid just there again, and it gets 12% then Fails. would this indicate...
View ArticleRe: UPS MANAGEMENT CARD
You will need to install the Dell UPS Management software. Then use this link to setup the email alerts:...
View ArticleRe: Hyper-V & Precision 490
Thanks again Flash , but honestly stil nothing .. I checked the BIOS and the hard drive does show up ... I checked the Sata Opteration and its set for " Raid Auto / ATA " the only other optinos are "...
View Article