Re: OME Update Catalog Broadcom Network Firmware 7.6.15 Fails to install
I updated the nic driver to the latest catalog version as well. I'll attempt to do a Lifecycle update on one of my newer servers when I can restart it.
View ArticleiDrac Firmware Upgrade Caused Server to Become Unresponsive
Hi all,Was hoping someone else has seen the issue I encountered today. We have an R620 server running ESXi 5.1. Today I attempted to update the iDrac firmware. I hadn't even uploaded the firmware file...
View ArticleRe: iDrac Firmware Upgrade Caused Server to Become Unresponsive
Updating iDRAC firmware should not cause “server became unresponsive”. When exactly you encountered this problem? Which method are you trying to update iDRAC FW (Racadm, iDRAC GUI Etc.)? Also let us...
View ArticleRe: iDrac Firmware Upgrade Caused Server to Become Unresponsive
I was using the iDRAC GUI to perform the update. We currently run FW 1.20.20 (Build 24) and I'm trying to update to 1.40.40_AI clicked on the update firmware link and it displayed a message stating...
View ArticleRe: Dell R610 "Unsupported memory configuration" bios message
Hi All,i have the exact same problem as you. And spoken to Dell Support and they did recommend to relocate RAM to A1,A2 and B1,B2after that, my server no longer prompt F1 ***.Cheers.
View ArticleDVD Drive
I have another problem with the DVD drive in the server. It is connected to connecter SATA B on the Motherboard, but I can't see it in the BIOS or the Boot menu.Do I have to boot on a ext. drive?
View ArticleRe: occasional fatal PCI error with an Intel x520 10gb NIC installed in a...
Updating Intel NICS with that solution is not possible, neither through USC. It fails. Had to remove the NICs and put them in a different server with Windows Server and then ran the firmware installer
View Articledell not detecting disks
Hi im trying to install windows server 2008 r2 64x on my Dell PE 1950II but is not detecting the 73GB 15K SAS drive that is in it. There are no other hard drives in the machine just empty caddies. The...
View ArticleRe: dell not detecting disks
What controller is installed on this server? You may need to manually load a driver if the DVD is not detecting the controller. Regards,
View ArticleBroadcom 57810-k Port Partitioning?
Hi,I would like to put "Broadcom 57810-k" in M620 server but I could not find any resource proving that it supports port partitioning (in to 4 virtual ports).Could anyone help me with this...
View ArticleRe: dell not detecting disks
Download this file and extract the contents to a USB key: http://downloads.dell.com/FOLDER89865M/6/DELL_MULTI-DEVICE_A03_R210510.exe Point to the USB key for the controller driver during the...
View ArticleRe: dell not detecting disks
Extract them to the root of the USB key then you don't have to go through the subfolders locating them.
View ArticleRe: dell not detecting disks
I installed the drivers and it still syas no drives detected any idea's?
View ArticleRe: dell not detecting disks
Restart the server, and enter the Ctrl R bios during POST. Create a RAID 0 on the single drive and initialize it. Then try your install once again. The Perc 5/i controller doesn't support non-RAID...
View ArticleRe: Broadcom 57810-k Port Partitioning?
Aselim84,The M620 does support the 57810-k, as well as the 57810-k does support partitioning up to 4 virtual ports per physical ports. Let me know if this helps.
View ArticleRe: dell not detecting disks
I tryed to create a a Raid 0 drive on the Bios but its not letting me with one drive and I only have the one :/
View ArticleRe: Max R720xd on a circuit
Thanks Geoff...the tool used for the older systems provides a cooling estimate "Resonable cooling" = in tons.I don't see this in the new tool, is this an option.Thanks again
View Article