Re: Dell T620 Bios modification
If you boot into the BIOS F2, one of the main sections is serial communication. It is a new BIOS layout....
View ArticleViewing the Hardware Event Log on R710 from OS ?
Is it possible to view the Hardware Event Log from Win2008 R2 OS ?There is no connected DRAC and I do not want to reboot to view from BIOS...
View ArticleRe: Viewing the Hardware Event Log on R710 from OS ?
Yes, using OpenManage Server Administrator (OMSA):ftp.dell.com/.../OM-SrvAdmin-Dell-Web-WIN-7.3.0-350_A00.exeDownload and run to extract, then run C:\Openmanage\windows\setup.exe. Add...
View ArticleRe: M1000e CMC firmware upgrade issue
Hi Daniel,CMC-standby did not come online after the after the physical remove. The CMC is standaolne now.Please advise.
View ArticleRe: PowerEdge 2950 running louder than normal
Just wanted to chime in and say if you added memory to the server, that could be the cause of the louder fans. After I upgraded a PE 2950 III from 8GB of RAM to 32 GB, the fans were noticeably louder....
View ArticleRe: M1000e CMC firmware upgrade issue
bdjebbarCMC-standby did not come online after the after the physical remove. The CMC is standaolne now.That sounds right. It is the only one inserted, correct? If there are not two installed then there...
View ArticleRe: Viewing the Hardware Event Log on R710 from OS ?
No luck.Invalid Cert error. SSLError=1677216
View ArticleRe: Viewing the Hardware Event Log on R710 from OS ?
Until you install a certificate, it will generate that warning ... just click continue.
View ArticleRe: M1000e CMC firmware upgrade issue
Both are inserted. CMC-standby is not shown on the web GUI.
View ArticleRe: Viewing the Hardware Event Log on R710 from OS ?
Clicking continue fails. More Info. gives the SSLError=1677216
View ArticleRe: M1000e CMC firmware upgrade issue
The one that failed the update will probably require replacement. I would suggest removing it from the system for now. Update the other CMC to 4.4.After the other one is update remove it from the...
View ArticleRe: M1000e CMC firmware upgrade issue
Hi Daniel,What is the impact if the upgrade fails again and I lost the CMC?Thanks.
View ArticleRe: M1000e CMC firmware upgrade issue
bdjebbarWhat is the impact if the upgrade fails again and I lost the CMC?Until a functional CMC is installed this will occur:Fans will operate at maximum RPMBlades will not be accessible remotelyBlades...
View ArticleRe: Viewing the Hardware Event Log on R710 from OS ?
Are you opening the site (https://localhost:1311) in IE? Do you have any other settings/features/roles enabled that might be "out of the ordinary"? Is IE ESC enabled? Where exactliy are you seeing...
View ArticleRe: M1000e CMC firmware upgrade issue
Hi Daniel,Thank you for your help. Is there any way to get the failed CMC running again?I tried many times to remove and reinsert the module but no success.Thank you.
View ArticleRe: M1000e CMC firmware upgrade issue
If it is nonfunctional when it is inserted by itself then I don't think it is salvageable. There is no way to communicate with it if it is not coming online. Because of this you will be limited to what...
View ArticleRe: PowerEdge R510 Fans out of control after ram install and Bios update
I lied guys, the problem is back after we shutdown server for windows updates. Now the fans wont stop spinning at full speed even at the original 16GB ram it came with. I think its the bios upgrade...
View ArticleRe: PowerEdge R510 Fans out of control after ram install and Bios update
On the download page for the BIOS update, scroll down, and find the version you need under Other/Older Versions ... just run it the same way you ran the latest update ... it will show you the current...
View ArticleRe: Viewing the Hardware Event Log on R710 from OS ?
Yes, that is how I am opening the site.I am trying this on an existing LAB Server that co-hosts SAN Management and VMWare. I will spin up a minty fresh OS and try it there.
View Article