I have a R710 in a cluster of 3 that are configured the same. Doing a memory upgrade to 72G using 8G Dual Rank DIMMS. 2 out of 3 worked fine. The third one won't take the upgrade. I know the memory sticks are good and I've replaced the system board. Firmware is at 6.4. During BIOS I get memory DIMM errors at A1, A4, A7. There is one X5560 Processor and I've verified BIOS settings are the same as the other servers. Memory is running at Optimized to utilize all 9 slots. Voltage is at 1.5v. Is there any scenario where the Processor could cause this problem?
↧
