Re: Trouble with Integrated Dell Remote Access Controller 6 - Express
Can you let me know the iDRAC FW Version, Server Model and Operating System installed on the server?
View ArticleRe: Trouble with Integrated Dell Remote Access Controller 6 - Express
did you setup a team using the shared nic? If yes, I think you have included the idrac's IP/mac in the team.
View ArticleRe: PowerEdge 840. Sound card..
Yep, I got a logitech usb headphones. plugged them in and they worked.
View ArticleRe: Poweredge 840 Fan noise and monitoring tools?
update years later... upgraded my server to dell t320 and WOW... the new servers are so quiet right out of the box.The 840 was monstrously loud and only by doing a fan replacement mod (which isn't...
View ArticleRe: recommendation for USB 3 PCIe card for PowerEdge T320 Server?
+1 - bump for same question
View ArticleRe: Is it total backplane failure or all disks have failed
any update on this. i presume that you ran full backups on the drives before replaceing/rebuilding them?
View ArticleRe: T110's boot manager doesn't find all usb sticks
Solved: I tried a third stick formatted in exFat, Fat32 and NTFS.All three works. So, something is wrong with the stick, not the poweredge.
View ArticleMax harddrive size for T110?
Hi What is the maximum hard drive size that I can use with my Poweredge T110? Do you need me to find the name of the mobo for you to help me with this?/
View ArticleM1000e Chassis with M820 Blade in Slot 2 :Failed to query Blade-information
Hi All, We are observing some logs in our CMC during which the Chassis makes very loud noise(Fans).The CMC logs are shown below:May 8 09:24:45 Chassis health is HealthyMay 8 09:23:50 Failed to query...
View ArticleRe: M1000e Chassis with M820 Blade in Slot 2 :Failed to query Blade-information
What is CMC and iDRAC FW Version?
View ArticleRe: M1000e Chassis with M820 Blade in Slot 2 :Failed to query Blade-information
Hi,CMC version is 4.31iDRAC version is 1.37.35Thanks
View ArticleRe: VMQ High Latency Issues
Geoff,Thanks for your response.I already received a new driver from Broadcom which fixed these problems, version 15.6.0.11.They don't answer on any question if this driver can be used in...
View ArticleDell R610 RAM configuration
Dear all,we currently own a Dell R610 (dual Xeon E5620) with a total of 16GB RAM consisting of 8 x 2GB.We are planning to double the memory to 32 GB.What would be the best RAM configuration? Taking all...
View Article2161AD KVM
Hi All,First post..apologies if this is in the wrong forum.Just hooked up one of these KVMs for testing, and when using the GUI to access a connected device I get a green screen saying "no Signal". Any...
View ArticleUSB3 card for Poweredge r510
Are there any USB3 PCI-E cards that will work in my VM server2012 on R510 hardware?I would need a card that doesn't require an additional molex power connection because one does not seem available in...
View ArticleRe: Max harddrive size for T110?
HappyAmateur,The largest drive we offer for the T110 is a 3TB Hitachi (part number CWJ92). Now that being said, the only controller that supports that drive is the H700.If you have any other controller...
View ArticleRe: USB3 card for Poweredge r510
Dell does not have a tested or certifed USB 3.0 card for any of their servers. You can test on your own to see if it will work for you. There may be users that have successfully installed them. But...
View ArticleRe: Dell R610 RAM configuration
Hi OliverTe,You can do that and go with 2X16GB or you can add 2 more 8GB sticks and have two dimms per channel. They both will perform the same. If you do replace the memory low voltage dimms would use...
View ArticleRe: 2161AD KVM
Hi exit12,What is the resolution of the monitor that you are using? If it is too high of a resolution it will not display video. The supported resolutions are 16:10 widescreen, up to 1680 x 1050 4:3...
View Article