Re: Poweredge 1800 RAM Upgrade error. Please Help
I would try clearing the NVRAM using the jumpers on the motherboard.
View ArticleRe: Dell PowerEdge 1920W UPS Network Management Card
Hello tombullockoelIt should be fairly straight-forward. Are you sure that the COM port you are using is the serial port that the management cable is attached to? I would suggest trying the other...
View ArticleRe: Poweredge 1800 RAM Upgrade error. Please Help
I cleared the NVRAM and now it is saying "Memory address line failure." Any ideas? I appreciate your time helping me through this.
View ArticleRe: Poweredge 1800 RAM Upgrade error. Please Help
Well, I'm kind of out of ideas:- You said the original memory works, so the slots are working fine (probably).- You said the memory works in an identical server, so the memory itself should be fine.Is...
View ArticlePE R200 and USB 3.0
I have searched every where for an answer and can't find it.If I put a PCIe USB 3.0 card in a PE R200 will I get USB 3.0 speed, or will it only support up to USB 2.0 speed? thanks
View ArticleRe: PE R200 and USB 3.0
Hello rsulzingerIf you can get a USB 3 card to work in the server it will operate at 3.0 speeds. The PCIe bus is fully capable of supporting those speeds, so it is not a question of the system board...
View ArticleNeed to update iDrac and LFC.
I have a PE T410 iDrac version 1.85 and LFC 1.52.Updating the system I got "The updates you are trying to apply are not Dell-Authorizied updates." I see from comments that my version of iDrac and LFC...
View ArticleRe: PowerEdge R720 supports PCI-X raiser cards?
Hi Geoff,Just to clarify, I have watched a video on Youtube regard installing a PCI-X riser card into 710 server.Is this not a proven/certified method?Link: (Please visit the site to view this...
View ArticleDell C6100 BIOS update
Hello, I bought a used C6100, and as I feared its not a C6100, rather one of those custom ones.Is there a way to make sure it is not a C6100? I tried the service tag and it was not found.I would like...
View ArticleRe: Dell C6100 BIOS update
Dell won't and can't help you. There is nobody customer-facing that has any knowledge, documentation, utilities, or files for these custom machines. It is entirely possible that they were not...
View ArticleRe: Dell C6100 BIOS update
Thanks, weird though its the same specs, even has a service tag. Is there a way to confirm that this is not a normal c6100?The bios calls it a xs23-ty3 which is a C6100, do you think I should get my...
View ArticleRe: Dell C6100 BIOS update
If you have to have a C6100 and all that comes with it (Dell support - drivers, updates, tech support, parts, etc.), then get your money back. If you just need a cheap computing device, it might do...
View ArticleRe: Dell C6100 BIOS update
Already sent him a message thanks ;). For $700 and 96 gb of ram I guess I can not complain. It gets the job done even if its outdated.Will set to solved in a few days if no one else has any input
View ArticleRe: Need to update iDrac and LFC.
You can download latest iDRAC FW from below Link www.dell.com/.../poweredge-t410Latest LC firmware will be available on below link www.dell.com/.../poweredge-t410
View ArticleRe: Use a PCI graphics card on Poweredge T620
Dell - Chris HThe 12th generation servers differ in the fact that you can use the 3rd party video cards in them, but in a GPGPU use. Not for the sake of video display.skylarkingNow what is still...
View ArticleSpeed and Duplex settings not showing 1 Gb full auto in Dell PowerEdge R720
Hi,My Dell Server (PowerEdge R720) running OS (Windows Server 2008 R2) is not showing 1 Gb Full Auto option in speed and duplex setting of any Ethernet card. Is it a default behavior or something I...
View ArticleRe: Use a PCI graphics card on Poweredge T620
From my (limited) experience it appears something is going on somewhere (BIOS or system bus level) to stop video output on installed cards, while letting them install perfectly in every other way. Why...
View ArticleClik here to view.
Re: Dell PowerEdge 1920W UPS Network Management Card
Yes, theres only 1 COM port. I've also tried using the COM port on our server (T620) and I get the same blank screen. All the settings are correct (9600, 8 bits, no parity, 1 stop, no flow)
View ArticleRe: PowerEdge R720 supports PCI-X raiser cards?
This is a non standard configuration. As you notice, this was done as an OEM installation for a specific customer. You would have to go through the OEM group for this configuration, as the risers are...
View ArticleRe: Speed and Duplex settings not showing 1 Gb full auto in Dell PowerEdge R720
This is normal, since the cards default rate is 1gb. It can vary by manufacturer, on the same OS, Intel cards will show 1gb as a choice. Win2012 is the same way for bcom, no 1gb choice is available.
View Article