Re: what is the oem reserved partition from factory
SUU (Server Update Utility) is a repository of updates for use with SBUU to update system firmware all at once from outside the OS (it can also be run from inside the OS to update drivers and...
View ArticleRe: what is the oem reserved partition from factory
do you have a link for use with windows server 2012 version?
View ArticleRe: what is the oem reserved partition from factory
Only the very latest version works with 2012:ftp://ftp.dell.com/secure/FOLDER01184482M/1/OM_SMTD_720_A01.iso
View ArticleRe: Poweredge R200 no display or diagnostic lights, ipmi works
Hum, that's strange my Dell R200 stops at the same day March 14 with exact the same symptoms. It turns on, but after a while it stops with the system indicator on orange/amber. I have the server here...
View ArticleRe: Poweredge R200 no display or diagnostic lights, ipmi works
The data center switched my secondary nics and the LSI card slots and then it went up for a a few hours and then back down again. Now i cant even get the chassis to turn on through ipmi. Though the...
View ArticleR710 keeps rebooting after I hit F10 to enter diags.
R710 keeps rebooting after I hit F10 to enter diags.
View ArticleRe: R710 keeps rebooting after I hit F10 to enter diags.
Do you have a bad drive (ID 0)? Does it reboot when booting the OS or to BIOS?
View ArticlePowerEdge R300 memory
I'm asking If Kingston DDR2/667 4GB ECC CL5 DIMM Dual Rank x4 (KVR667D2D4F5/4G) is compatible with my PowerEdge R200can anyone answer this?
View Articlepoweredge 2900 non-responding
hello everyone, when i press the power button server ventilators doesn't respond ! there's a yellow LED on , the screen displays "NO VIDEO INPUT"pleaaaaaase help
View ArticleRe: poweredge 2900 non-responding
Wided86,Would you power the server down and remove everything from the server but the following? System board Processor (with heatsink) in socket 1 One stick of memory in slot 1 1 power supply Power...
View ArticleRe: PowerEdge R300 memory
No, it won't work. The R300 requires Registered ECC DIMM's. The one you listed is Fully-Buffered (FB-DIMM's), which would not even fit in the...
View ArticleRe: Poweredge R610 Mixed Memory
Hello igmacWith 8x4GB and 4x8GB modules available the maximum configuration would be this:A1/B1: 8GBA2/B2: 8GBA4/B4: 4GBA5/B5: 4GBAvailable memory will be 48GB unless my math isn't working this...
View ArticleiDRAC - shared network question
I'm low on network ports in my computer room and want to set up the iDRACs to use the shared network port instead of a dedicated port. If I do this, will the iDRAC work when the server is turned off?...
View ArticleRe: iDRAC - shared network question
Hello KevinYes, it will still be accessible when the server is powered down. The primary negatives are that the available bandwidth for applications on the NIC port that is shared will be reduced...
View ArticleR620 with extra 5719QP card ports do not work on it.
Anyone using an R620 with both the integrated 5720 and 5719 QP cards for a total of 8 ports?I am running Ubuntu 12.04 LTS (recently certified) and am not able to use eth4 through eth7. I.e the ports...
View ArticleRe: R620 with extra 5719QP card only 2 ports work on it.
I take that back.... none of the ports on the 5719QP card work. I have edited my original post to reflect that...I have 6 of these machines and they all behave the same.I am on the latest 12.04 as of...
View Article