Re: Adding SATA drive to port 1 does not show in BIOS
theflash1932: thanks I'll take a look at this tomorrow and follow up.Regards
View ArticleR610 Freezing / Memory Issues
I have an R610 that's been randomly locking up periodically. I've run Memtest86 for 24+ hours at a time with no issues.Today, however, it locked up again, and I got the following error loged in the...
View ArticleRe: Adding SATA drive to port 1 does not show in BIOS
theflash1932: wanted to followup on this issue. Well both 500GB drives are bad, one being mine on a shelf as backup, hmmm. I had an 80gb SATA drive and stuck it on the SATA1 port and still got the same...
View ArticleRe: Adding SATA drive to port 1 does not show in BIOS
Oh, you do see it in the BIOS as well, when Enabled.
View ArticleRe: Adding SATA drive to port 1 does not show in BIOS
When using the onboard ports and no RAID controller, you will see them in the BIOS, but typically you will only see them in the RAID BIOS/configuration utility when using RAID.Glad you got it ... that...
View ArticleRe: R610 Freezing / Memory Issues
What slots do you have memory and what size? Are you running it as optimized or as Advanced ECC? Do you have RDIMM's or UDIMM's? Thanks,
View ArticleRe: R610 Freezing / Memory Issues
6x4gb RDIMMs in A1, B1, A3, B3, A5, B5 - pretty sure this was how it originally shipped.ThanksNick
View ArticleRe: R610 Freezing / Memory Issues
Should be set up as optimizer mode, using slots A1, A2, A3, B1, B2, B3 Go to the F2 bios, and check the memory mode after confirming the DIMM locations. Let us know,
View ArticleRe: R610 Freezing / Memory Issues
I'll power it down this evening and swap things around, unless it locks before then.ThanksNick
View ArticleRe: Dell PE R910 Not booting up
Hi, I have the same server newly purchased. The system is booting and no issues in the front LCD. But the LEDs you mentioned in the board are lighting green and red. I am not sure what they exactly...
View ArticleRe: RAM upgrade on PowerEdge TT710
DELL-Daniel MyI would suggest putting the 8GB DIMMs in {1,2} and the 2GB in {4,5,6}, {7,8,9}.This information isn't correct per Dell's online owner's manual for the T710 (and all Xeon 5500/5600...
View ArticleRe: Dell PE R910 Not booting up
I have already solved he problem with cros-checking another P910....and found that PCB board (which reside rear the PSU) got malfuntioned. After changing that my server is now booting OK.Masud
View ArticleRe: Dell PE R910 Not booting up
Hi Masud, Thanks for your reply. I dont face any issue in booting. I have not yet installed the OS on it. Dell support says, as long as it is not showing any error in front LCD, it would be fine. But...
View ArticleRe: PowerEdge T420 - Installing Hyper-V on to SD Card option
I would really like the Dell hardware solution along with a full Microsoft solution. I have found an article that someone had put Hyper-V Server 2012 on to a 16Gb USB Stick...
View ArticleScrews for T410 5.25" rails
Hi!Where can I get the screws to attach another 5.25" drive to my PE T410 ?Thanks!
View ArticleRe: Screws for T410 5.25" rails
What kind of device are you adding? Normally, screws come with the drive from the manufacturer. Does it require fine thread or standard thread screws? Regards,
View ArticleRe: Screws for T410 5.25" rails
The same as the ones that came on the installed dvd-rom.Thanks.
View ArticleRe: Screws for T410 5.25" rails
Here is a link: www.mcmelectronics.com/.../83-12501 you may be able to find locally as well.Regards,
View ArticleRe: PowerEdge T420 - Installing Hyper-V on to SD Card option
From what I've seen, Dell will not support or sell a solution where a Microsoft OS is installed on anything other than a harddrive or SSD.
View ArticleRe: Screws for T410 5.25" rails
Thanks but that's not the right ones for PE T410. The ones I need have a space between the head and the threads, it keeps a space to slide the drive on the case slots and lock the drive in-place with...
View Article