Re: PowerEdge UPS Settings
The shutdown timer is how long it waits before initiating the shutdown sequence after power loss. Shutdown duration is how long it takes the system to shutdown, so that it knows how long it needs to...
View ArticleRe: How to get the HostName to populate for Linux in the DRAC.
Thx Josh...Shall give it a try...JB
View ArticleRe: PowerEdge 2950 rack server fan replacements
Another alternative would be to look at investing in a sound proofed cabinet. They're not cheap but can be found on www.ebay.com from time to time if you keep an eye out for auctions.
View ArticleRe: PowerEdge 1900 - No video
I might just suggest restarting the machine with no RAM installed and see if the error changes. I can't explain the logic behind it, but in the past this has sometimes seemed to reset everything in the...
View ArticleRe: SC420 A01 BIOS Update Error "Flash Access Denied"
right click on your browser... click run as admin ... go to the dell download... download in browser... the installer will pop up.... run it will ask to shut down windows and then flash the bios......
View Articlegraceful reboot from Centos based LiveDVD
I recently attempted to use the 7.4 version to update the bios on my R710. All was good until after the bios update completed successfully and then displayed a notice to restart the system for the...
View ArticlePowerEdge720 PSU Fault
Hello.After update firmaware for PowerSuply i have PSU Fault.If i see lifecycle control in firmware update -Power Supply.Slot.1 Current 09.00.00 avalible 09.2B.80 Power Supply.Slot.2 Current 09.2B.80...
View ArticleDell server R910
Hi friends,I have dell R910 server and when I want to go to BIOUS by pressing f2 I get system halt error and stack there any suggustion.
View ArticleDell PowerEdge 2950 - Upgrade ALL hardwares firmwares.
Hi,We got a Dell PowerEdge 2950 server without any hard drive disk.I would like to Upgrade all hardwares firmwares (BIOS, RAID, Networks, chipset, etc).I downloaded the latest SUU on Dell Website. Its...
View ArticleDell 1950Iii wrong CPUidentification
I have a strange situation.I have upgraded my 1950III (bios 2.7.0, windows SBS2008 64bit) with two X5365 processors.Windows device manager shows one to be X5365and the other 5160, swapping the CPU with...
View ArticleT630 GPU configuration
Hey everyone,I'm having some trouble getting my third party GPUs working on a T630. I have no problem with the system otherwise. I intend to use them as GPGPU cards, but can't even get them to show...
View ArticlePowerEdge T110 II with GTX760
Hi,I bought a PowerEdge T110 II a few years ago with an Xeon 1240 CPU and 32 wonderful Gigs of RAM. Now, this machine got spare. So I decided to use it as a coding and gaming machine.My first tests...
View ArticleLegacy PCI support in DELL PowerEdge R720
Hi,I am using DELL PowerEdge R720 and need to install legacy PCI card in it, is there any way I can install PCI legacy card as there are only 4x PCIe slots. I mean by installing adapter or something...
View ArticlePowerEdge T110 II network and SAS
Hi I have a 2 years old T110 II server and I want to install an additional dual port GB card like Dell Broadcom 5720 for a Hyper-V installation and a Perc H310 card which can be easy found in my...
View ArticleR200 with BCM95721 network wont link up at 1000Mbps
Hi,We have a PowerEdge R200 server with the Broadcom BCM95721 network controller. It's stuck at 100Mbps link to a 1Gig switch. We have other, older, PE servers connected to the same switch and they...
View ArticleR415 power supply connector adapter needed
Hello All!We're spinning up an R415 as an audio streaming server and we installed an Asus Xonar DX high-end audio card in the PCI-e riser slot to get our audio to the server. However the card needs...
View ArticleDellPoweredge 2900 Tower Hard Drive Bays 4-7 Not online
Hi all,Ive worked with these servers for ages and this one is throwing me right out.. Its the tower model, in its factory default configuration and specification... Perc 5/i RAID Card installed..Drives...
View ArticlePowerEdge 1900 Hangs on Boot
I have a pe1900 that has been working just fine. I shut it down before a storm in anticipation of a power failure, which did not occur (it is connected to a ups).Upon restarting, the system will show...
View ArticlePoweredge R410 Strange Network Issues
I have 3 Poweredge R410 servers that I purchased around the same time. 2 exhibit this strange behavior where at some point, it stops reporting to WSUS and at the same time, doesn't allow you to RDP...
View Articlem1000e Chassis Alerts via email
Hi,We wish to stop a specific Critical email alert, which we have been seeing a lot since updating to version 5 of the firmware on a few chassis (but not all).The alert is "Event Message: Chassis...
View Article