Re: R715 Random Reboots
Chris,Thanks for the response. The information is below. This were the suggested firmware updates I applied with Dell support even though the BIOS is out of date and so is the PercBIOS 2.9.0iDrac 1.95...
View ArticleRe: Wake on LAN for Dell PowerEdge 1950
Is the system using Hyper-V? That will disable WOL. Enabling it in ctrl+S should allow the hardware to do it. Did you enable on the NIC in Windows under the advanced tab for the nic properties?In...
View ArticleRe: R715 Random Reboots
Would you update both those and then boot one of the servers to this ISO - linux.dell.com/.../OMSA71-CentOS6-x86_64-LiveDVD.isoFrom that gui run a dset report - www.dell.com/.../poweredge-r715Copy the...
View ArticleRe: Wake on LAN for Dell PowerEdge 1950
Hello, System is not using Hyper-V. I did enable WOL in ctrl-S and that didn't work. I did try to do 1B but when I go to configure -> Advanced I do not see anything remotely close to wake up...
View ArticleRe: Wake on LAN for Dell PowerEdge 1950
You should be able to enable sleep with the following steps:1. Click Start, click Control Panel, and then double-click Power Options. 2. Under the power plan that is configured, click Change plan...
View ArticleRe: Dell FS12-NV7 information?
Viper5120. Was wondering on how to config the boot from USB. I've done it on the cs24's with no issue's but with the nv(with perc 6i) I keep booting into the perc bios for drives but no way to select a...
View ArticleRe: Dell FS12-NV7 information?
Well on that server I have to go to boot device settings and add usb as first device. I shutdown server plug in usb boot server then I add usb to boot-able
View ArticleEnable Intel VT remotly.
Dear All,I have a Dell PE 2950 Server located in one of the brach offices. I have to enable intel VT to have Hyper-V on the server. Is there any way or tool to enable Intel VT remotely ? Thanks in...
View ArticleDell KVM 2321DS - Java problem
We have a Dell KVM 2321DS switch.The Dell Remote Console Switch software does not work if we use the newest Java software. We have updated the console switch firmware and use the latest console switch...
View ArticleRe: Enable Intel VT remotly.
Rajesh.If you have a Drac 5 installed then you can boot the server using the Console Redirection. You would connect to the Drac web interface and then click on the Console tab and then Configure. Place...
View ArticleRe: Enable Intel VT remotly.
If you don't have a DRAC in the server, you can also use an IP KVM to achieve the same result (at a remote site it is usually a good idea to have all servers on IP KVMs in case you need to do something...
View ArticleCompatible Hard Disks - Perc 6i
Hi guys,I have a PE 1950 with a PERC 6/i integrated controller, this controller support SAS 6Gbps hard disks?thanks!Diogo
View ArticleRe: Compatible Hard Disks - Perc 6i
Yes, 6Gbps disks will work, but the PERC 6 is a 3Gbps controller, so you will not use the full bandwidth capacity of the drives.
View ArticleRe: Compatible Hard Disks - Perc 6i
However, only SSDs can max out a 3Gbit/s connection, and those aren't supported on a PERC6 (meaning that they may or may not work and you have to test it yourself to see what it does).
View ArticlePE2950 chassis swap
We have a failed PE2950 (RN50 A21 BIOS). Does anyone know the procedure for taking the drives out of a failed 2950 chassis, moving them to a spare 2950 chassis and booting them up?Thanks,Eric
View ArticleRe: PE2950 chassis swap
If the controller hasn't failed, move the controller with the drives. Even though the controller supports drive roaming, I would mark the drives as you pull them and put them back in the same slots....
View ArticleRe: Dell KVM 2321DS - Java problem
Downgrade to a previous version of Java (1.7 build 21 for example).
View ArticlePowerEdge 1900 - No video
server poweredge 1900 with error E2011no video i have maid a swith of memory with no result
View ArticleRe: PowerEdge 1800 - No video
Try reseating your processors, installing only one in slot 1, and/or swapping processors if necessary.
View ArticlePoweredge R310, no power
Hi,I would really appreciate some help with my server, there is no sign of power apart from the std led on the mother board and the ID light flashing blue a number of times and then orange. Its as...
View Article