Re: Dell Server poweredge 1800 installing windows 2008 R2 standard edition...
OMG OMG.. I can't believe it...1, I installed Windows server 2003 32x... 2, Update Dell poweredge 1800 BIOS then ESM3, UPDATE PERC fireware 352D4, Boot system with Windows server 2008 R2 Standard 5, On...
View ArticleRe: Dell Server poweredge 1800 installing windows 2008 R2 standard edition...
Its Done... Thank you so much
View ArticleRe: Dell PowerEdge 1850 Server not acknowledge by router !
It doesn't matter how long you leave the second router connected.And if I connect the same Ethernet-Cable to a laptop, it responds to it within a few second, even though it may take awhile before it to...
View ArticleRe: Dell PowerEdge 1850 Server not acknowledge by router !
"if I connect the same Ethernet-Cable to a laptop, it responds to it within a few second"But with a different IP address, right?You might try flushing the ARP cache on the router.
View ArticleRe: Where to get FusionIO vsphere plugin and ESXi CIM providers?
Joe,Here is a walkthrough on loading the VIB - en.community.dell.com/.../1963.installing-and-configuring-the-dell-managment-vcenter-plugin.aspxHere is the VIB itself -...
View ArticleRe: Where to get FusionIO vsphere plugin and ESXi CIM providers?
Hi Chris,i do not want the OMSA VIB. That was not what i asked for. I want the ESXi CIM Providers for FusionIO. To clarify: If you buy FusionIO from DELL, you are not allowed to access the FusionIO...
View ArticleRe: Dell PowerEdge 1850 Server not acknowledge by router !
Yes..So I've just changed my laptop to the same IP as the server, and it was still detected in the router !but not server 2.
View ArticleRe: Dell PowerEdge 1850 Server not acknowledge by router !
Did you try both NIC ports on the server? What OS?
View ArticleRe: M1000e Chassis with M820 Blade in Slot 2 :Failed to query Blade-information
These Msgs are logged when CMC is unable to get the blades information.... These can also be noticed when server is reinserted or idrac on the server is not responding..Regards,VSS
View ArticleRe: Change smtp "From" address (R815)
This is not correct. I have the DNS drac name populated, but it is not included in the e-mail suffix. I just upgraded to firmware 1.40.40 and this still does not work. Apparently this has not worked...
View ArticleRAM Upgrade questions...Poweredge R610
currently, we have 6X4GB sticks of RAM for a total of 24GB. I would like to upgrade, and I found 3x16GB RAM for a decent price and a total of 48GB. Can I install 3 16GB sticks in sockets 1, 3, and 5...
View ArticleRe: RAM Upgrade questions...Poweredge R610
Hello dallasdunawayThat shouldn't work, but populating them in 1,2,3 should work. If the memory is the same type(UDIMM/RDIMM) then you should also be able to put the 4GB DIMMs in 4,5,6.Thanks
View ArticleRe: RAM Upgrade questions...Poweredge R610
I looked at the diagram wrong. I meant 1,2 and 3. Thanks. Would leaving 4,5 and 6 empty have any ill effect? I'm probably using those in a different box.
View ArticlePoweredge 2970 E1210 CMOS Batt (blade)
Hello,We have powered down, unplugged, replaced the cmos battery, reseted the memory and we still receive error E1210 CMOS Batt. We didn't have to flush the Cache since the server doesn't have any OS...
View ArticleRe: RAM Upgrade questions...Poweredge R610
dallasdunawayWould leaving 4,5 and 6 empty have any ill effect?No, I was just letting you know you could use them in case you weren't aware.Thanks
View ArticleRe: Dell PowerEdge 1850 Server not acknowledge by router !
Yes, several times.The OS is: BlueOnyx-5108R-CentOS-6.3ie, Linux-CentOS-6.3 with BlueOnyx 64 bit server software...Thanks
View ArticleRe: Poweredge 2970 E1210 CMOS Batt (blade)
Hello WillThe PERC should having nothing to do with the CMOS battery. You can view the voltages inside the system BIOS or via OpenManage Server Administrator in the OS.The LCD error is reported from...
View ArticleRe: Poweredge 2970 E1210 CMOS Batt (blade)
Thanks Daniel, I'll try it in the morning. Is clearing the error standard practice or should it clear once the condition no longer exists?
View ArticleRe: Perc H200e latest drivers and Firmware
Looks fine, except I wonder why they have the 32 bit version and say to run using WOW64?Surely most of the Windows server world is 64 bit and has been for several years.Just seems mystifying to...
View Article