Hoping someone might have experienced/fixed similar issues? We're currently have problems on a number of PER320 servers where they intermittently loose network connectivity and am unable to reset until a reboot is completed.
We have applied firmware/drivers per standard but the servers are still intermittently dropping from the network. When you log onto the server, the NIC appears connected but rx/tx does not increase. If you should try to disable the NIC and re-enable, the system hangs until reboot.
I have discovered one other post detailing exactly the same issues (https://community.spiceworks.com/topic/462368-server-regularly-losing-connectivity)
Working from this we have tried disabling RSS and offloading but the issue persists.
Description | Broadcom NetXtreme Gigabit Ethernet #2 |
Vendor | Broadcom |
Slot Name | Embedded |
Driver Name | b57nd60a |
Driver Image Path | C:\Windows\system32\DRIVERS\b57nd60a.sys |
Driver Version | 17.0.0.3 |
Firmware Version | Family 7.10.64 (Boot Code 5720-v1.36, PXE v17.0.1, iSCSI v17.0.0) |
Thanks in advance