Hello rimblock
RimBlockIs there any documentation on the led cluster diag codes as I see nothing in the manual.
I could not find any information on those LEDs. I suspect they are part of the PCIe card. The picture I have of the rear of the system isn't the greatest but I could not see any LEDs under the PCIe slot.
RimBlockThe BMC is accessible remotely but it is stuck in maintenance more (and not giving an option to upload any firmware).
It sounds like it is stuck in a firmware update. I would recommend draining flea power by disconnecting the node from the chassis for about 30-60 seconds. If that does not bring it out of maintenance mode then clear the NVRAM via jumper page 140. If the issue still persists then try the node in another slot. If that does not change anything then you will need to start removing unnecessary components like the PCIe card and extra memory(minimum to POST). If there is still no change then the system board may need to be replaced because of a failed update.
Thanks